use paper - recorder setup simple
select a size landscape
select horizontal channel x axis = time for one channel input
select horizontal channel x axis = voltage
vertical channel = 1
grid (inch / cm) your choice

next page
ani0 unit = voltage
manufacturer = adsi
device attached = -10v to 10v (or other if you have smaller voltages)
vertical axis label = ain0
units on graph = volt or millitvolt
select maximum volts display (you will have 6 major units)
select minimum volts display
select 1 for no attenuator or select 10 for 10x probe
select sample rate/resolution index base on accuracy/speed desired

next channel

repeat for ain3 if you chose horizontal = volts above.