Technical Support Bulletins

Axxis HS Finisher Web Path Diagram
Wed, Mar 11, 2015 at 3:15 PM
Axxis HS Cutter Calibration
If your serial # ends in 'T', this document explains how to calibrate the cutter.
Wed, Mar 11, 2015 at 3:39 PM
Axxis HS Accumulator Calibration
This document explains how to verify the accumulator potentiometers are reading, and operating, properly in the Axxis HS Finisher.
Wed, Mar 11, 2015 at 3:45 PM
Error Codes
Error Code Meanings
Wed, Mar 11, 2015 at 2:46 PM
Axxis HS Finisher Firmware
ADSI Technical Support may request the firmware be updated for a few reasons. The attached document explains how to properly install the recommended firmwar...
Wed, Mar 11, 2015 at 3:47 PM