Technical Support Bulletins
This document explains how to calibrate the Talon Finisher cutter.
Wed, Mar 11, 2015 at 3:43 PM
ADSI Technical Support may request the firmware be updated for a few reasons. The attached document explains how to properly install the recommended firmwar...
Tue, Aug 20, 2019 at 1:08 PM
Home -> settings -> about this machine -> user settings -> menu settings -> 2, 5, enter -> menu settings -> 9, 1,5, enter -> Home ...
Mon, Apr 8, 2019 at 1:34 PM
Disable/enable the analog joystick as follows: From Home screen: Press blue Settings button Press About This Machine button Press User Setting...
Mon, Apr 12, 2021 at 12:21 PM